Melges Performance Sailboats unveiled their new Melges 15, click here for details
Plastic Driva (pack of 12)

Plastic Driva

$8.80

If replacing damaged plastic driva. Use a philips screw driver to try and take out. Driva may break off in which case the thread will fall inside the hull of the boat and the top bit can be picked off. Place mastic in the hole and carefully fit.Take care not to over tighten as this will break new driva. If fitting driva for the first time drill 6mm hole through the boat slightly counter sink the hole then screw in metal driva to make a thread in the plastic (may need doing a couple of times) take metal driva out (TP125) . Then place mastic in the hole and carefully fit taking care not to overtighten.

Available on backorder

Quantity:
SKU: TP126/1 Categories: , , ,

Description

Take care not to over tighten as this will break new plastic driva. If fitting driva for the first time drill 6mm hole through the boat, slightly counter sink the hole, then screw in metal driva to make a thread in the plastic (may need doing a couple of times), take metal driva out . Then place mastic in the hole and carefully fit, taking care not to overtighten plastic driva. Pack of (12)

Reviews

There are no reviews yet.

Be the first to review “Plastic Driva”

Your email address will not be published. Required fields are marked *

four × three =

East Coast Sailboats, Inc
8865 Caratoke Highway
Unit #5
Point Harbor, NC 27964
Tel: 252-489-3491

Subscribe to OUR newsletter & offers

Copyright © 2020 East Coast Sailboats Inc. All rights reserved